Description
Bluetooth Music Sun Hat
Instructions：
Bluetooth-enabled wireless stereo music hat, it can support Bluetooth Headset or Handsfree Bluetooth protocol of mobile phones and other portable devices connected to and supports AVRCP. Before using a stereo Bluetooth music hat make calls or receive calls, first follow the steps to complete the pairing with Bluetooth phones Bluetooth hat or other Bluetooth devices.
NOTE: During use, make sure that your cell phone or from the other Bluetooth device with your Bluetooth stereo music between hat within 10m; if there are obstructions such as walls between them, communication distance shall be reduced accordingly.
Mating connector：
Note: Before using a stereo Bluetooth hat, the hat must be stereo Bluetooth with your phone or other Bluetooth device pairing, it can only be used after the pairing is successful. Pairing means to establish a connection between Bluetooth devices to enable Bluetooth devices (cell phones) can remember the address of the Bluetooth stereo headset.
Bluetooth hat paired with the phone
a）the headset into pairing mode.
When the headset off, press and hold the multifunction button for about 5 seconds, until the red light and blue light starts flashing alternately or hear tone “Paring”, this time your headset will enter pairing state.
b）enabled mobile phone “device discovery” function. Follow the instructions on the phone to use the manual, do phone’s Bluetooth device search function, search the Bluetooth device process may take a few seconds. Find more information about mobile devices, see the phone’s user guide. After the phone search is completed, found devices will be displayed.
c）Select “BT05_S” from the list of devices that have been looked into, and then prompts based on mobile phones.
d）when the phone displays a message that will be asked to enter the PIN, you must enter the machine identification code 0000, and confirmed that the headphones address will be stored in your phone. (Some phones do not need to enter a password)
After e When pairing is successful, the Bluetooth hat alternately flashing red and blue lights flashing LED will turn blue and prompt “Paring Completed”.
Product parameters:
Bluetooth protocol：Bluetooth Ver.3.0+EDR
Power Standard: Class 2
Effective distance: 10M
Battery Power:140MAH(3.7V)
Frequency：2.4GHZ(2.402-2.483.5MHZ)
Sensitivity: 85dBm
Speaker parameters: 30MM 32 European 0.25W * 2
SNR:98Db
LED indication: power / for code / charge
Continuous use of time: 5–6 hours
Working current: 17-23mA
Charging time: about 2 hours (before the first use, please charge).
Operating temperature range: -10-50°C
Operating humidity range: 10-90%
Reviews
There are no reviews yet.