HDMI REPEATER 25+15 40米 HDMI 延長器 日本晶片 圖象畫質穩定 – S06140
This is a kind of upgrade HDMI Repeater. It extends the length of HDMI cable up to 35M by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector. Meanwhile, according to the length of HDMI cable the special designed EQ can be adjusted to reach the best transmission function.
This HDMI Repeater adopts the iron shell for better EMI elimination and it will clean out the digital noise (sparkles) in your picture. With the unique designed structure, this repeater can be fixed up with the donated nogs in “L” shape.
This repeater compatible well for HD-DVD,SKY-STB, PS3, Xbox36etc. It offers solutions for residential consumers: HDTV retail and show site, HDTV, STUB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
This kind of HDMI Repeater has many features that enable it to perform in a superior manner. Among those features you will find:
1. Support HDMI1.3b
2. Support highest video resolution 1080p.
3. Support 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
4. Support 12bit per channel (36bit all channel) deep color.
5. HDCP pass-through.
6. Iron Shell for better EMI elimination.
7. Support uncompressed audio such as LPCM.
8. Support compressed audio such as DTS Digital, Dolby Digital（including DTS-HD and Dolby True HD）.
9. 8 levels of equalization settable by turning EQ from 0 to 7, so that support different length of HDMI cable between 1m to 35m.
10. Unique designed structure for better connection.
Input video signal
5 Volts- p-p (TTL)
Maximum single link range
HDMI input/outut connector
Type A 19 pin
Vertical frequency range
50 / 60 HZ
Video amplifier bandwidth
Size(H – W – D)
50 x40 35mm
1 year parts and babor
0℃to + 70℃
10% to 85% RH(no condensation)
5% to 90% RH(no condensation)
External power supply
5v DC@2A (optional)
AC power adapter
US standard,uk standard and so on
Note: specifications are subject to change without notice
Before attempting to use this unit ,please check the packaging and make sure the following items are contained in the shipping carton:
Hdmi repeater x 1pcs
“L” shape nogs x 1 pcs
One nut x 1pcs
User’s manual x 1
1.)Connect the output of the source device into the input of HDMI Repeater and connect th output to the HDMI display unit. The HDMI repeater is put close to the HDMI display unit(input cables are optional)
*please refer to connection diagram section
2.) adjusting EQ from 0 to 7,according to the different length of HDMI cable.
3.)insert the DC side of 5v power supply if the 5v of the source is not enough.
Attention: insert /extract cable gently.